DongliPump reference
FMC M0610 triplex plunger pump
FMC / M06Documented source recordPage / reference 12–13
Supply identity and fitment need confirmation; this reference is not a price or stock commitment.
- Source brand
- FMC
- Model family
- M06
- Source reference
- M0610
What the source says
The supplied TechnipFMC catalog lists M0610 as an M06 horizontal triplex plunger configuration with 1.250 in plungers and a 1.5 in stroke. Its exact model row gives 11.4 GPM at 475 rpm, 12.0 GPM at 500 rpm and 14.3 GPM at 600 rpm. The M06 section rates continuous speed at 475 rpm and intermittent speed at 600 rpm. Confirm the actual fluid end and operating duty before selection.
Prepare an inquiry
Identification reference. Supply identity and fitment require confirmation. No price or stock commitment.
About this reference
FMC M0610 triplex plunger pump — reference M0610. This entry is organized under FMC / M06 using the supplied documentation. The source reference identifies a catalog entry; it does not establish interchangeability or current availability. This pump entry supports equipment identification and configuration enquiries. Selection requires a documented operating point and a confirmed supply scope, including whether the drive and accessories are included. The catalog distinguishes M0608–M0615 standard connections, 1.5 in suction and 1.0 in discharge, from the separate HV option of 2.0 in suction and 1.5 in discharge. Forged cylinder materials and cast ductile iron appear as separate material alternatives. The family lubrication description specifies splash with gravity return, with pressurized lubrication as an option; the source associates operation below its stated 100 rpm minimum with adding a pressurized system. None of these alternatives establishes the configuration supplied under a particular assembly number.
Selection & verification
Provide the nameplate, required flow and pressure, fluid, drive speed and installation envelope for selection.
Have the equipment reference ready?
Search this model in the catalog ↗Documented details
| Plunger diameter, exact model row | 1.250 in |
|---|---|
| Stroke, M06 family | 1.5 in |
| Displacement, exact model row | 0.0239 US gal/rev |
| Continuous / intermittent speed ratings | 475 / 600 rpm |
| Catalog capacity at 475 / 500 / 600 rpm | 11.4 / 12.0 / 14.3 GPM |
Before you inquire
Confirm the pump nameplate, exact model, existing part number and configuration. Reference numbers are not company stock codes.
Source documentation
TechnipFMC Reciprocating pumps — M06 specifications (supplied archive copy)
Page / reference: 12–13
A third-party source-page image (PDF page 1) is withheld from this public index while redistribution rights are checked. The cited model and page reference remain available for technical review. Contact Dongli ↗
Questions before ordering
How do I identify reference M0610?
Compare M0610 and the listed name “FMC M0610 triplex plunger pump” with the original part marking and the M06 documentation. Include the full number and suffix in your inquiry.
What should I confirm for this fmc m0610 triplex plunger pump?
Provide the nameplate, required flow and pressure, fluid, drive speed and installation envelope for selection.
Can M0610 be selected by model name alone?
No. The FMC / M06 grouping is a source-catalog context. Confirm the full reference, equipment revision and drawing details before treating this item as a match. Material, pressure rating, stock and interchangeability require separate confirmation.
FMC / M0610
Ready to discuss this reference?
Save this source reference, then include the nameplate, configuration and required quantity for Dongli to verify.