DongliPump reference
FMC M0612 triplex plunger pump
FMC / M06Documented source recordPage / reference 12–13
Supply identity and fitment need confirmation; this reference is not a price or stock commitment.
- Source brand
- FMC
- Model family
- M06
- Source reference
- M0612
What the source says
TechnipFMC’s supplied reciprocating-pump catalog identifies M0612 as an M06 horizontal triplex plunger configuration with a 1.500 in plunger and a 1.5 in stroke. The model row lists 16.3 GPM at 475 rpm and 20.6 GPM at 600 rpm; the M06 section rates continuous speed at 475 rpm and intermittent speed at 600 rpm. Confirm the fluid end, packing, inlet conditions and required duty before selection; catalog flow values are not a supplied-pump guarantee.
Prepare an inquiry
Identification reference. Supply identity and fitment require confirmation. No price or stock commitment.
About this reference
FMC M0612 triplex plunger pump — reference M0612. This entry is organized under FMC / M06 using the supplied documentation. The source reference identifies a catalog entry; it does not establish interchangeability or current availability. This pump entry supports equipment identification and configuration enquiries. Selection requires a documented operating point and a confirmed supply scope, including whether the drive and accessories are included. Two different M0612 suction-performance contexts appear on the M06 page: the shared NPSHr chart for disc valves with one standard-stiffness spring, and a separate M0612 chart for large-flow valves with one spring. The curves should not be substituted for one another. Standard M0608–M0615 connections are listed as 1.5 in suction and 1.0 in discharge, with 2.0 in and 1.5 in shown separately for HV configurations. Identify the valve arrangement, connection option and fluid-cylinder material before selecting replacement parts or an operating point.
Selection & verification
For M0612, match the 1.500 in plunger and required flow to the duty point: the model row lists 16.3 GPM at 475 rpm continuous-rated speed and 20.6 GPM at 600 rpm intermittent-rated speed. The catalogue shows distinct M0612 NPSHr curves for standard-stiffness disc valves and large-flow disc valves. Confirm the fitted valve arrangement, selected speed and inlet conditions before applying either curve; neither curve identifies the supplied configuration.
Have the equipment reference ready?
Search this model in the catalog ↗Documented details
| Configuration (catalog) | Horizontal triplex plunger / 卧式三柱塞 |
|---|---|
| Plunger diameter, model row | 1.500 in |
| Stroke, M06 family | 1.5 in |
| Displacement, model row | 0.0344 US gal/rev |
| Continuous / intermittent speed ratings | 475 / 600 rpm |
| Catalog capacity at 475 / 500 / 600 rpm | 16.3 / 17.2 / 20.6 GPM |
| Standard suction / discharge, non-HV row | 1.5 / 1.0 in |
| HV suction / discharge, separate catalog option | 2.0 / 1.5 in; not assumed supplied / 不默认随货配置 |
Before you inquire
Confirm the pump nameplate, exact model, existing part number and configuration. Reference numbers are not company stock codes.
Source documentation
TechnipFMC Reciprocating pumps — M06 specifications and performance data (supplied archive copy)
Page / reference: 12–13
A third-party source-page image (PDF page 1) is withheld from this public index while redistribution rights are checked. The cited model and page reference remain available for technical review. Contact Dongli ↗
Questions before ordering
How do I identify reference M0612?
Compare M0612 and the listed name “FMC M0612 triplex plunger pump” with the original part marking and the M06 documentation. Include the full number and suffix in your inquiry.
Which M0612 NPSHr curve applies to my installation?
Page 13 presents M0612 NPSHr curves for both standard-stiffness, one-spring disc valves and large-flow, one-spring disc valves. The applicable curve depends on the fitted valve and operating speed. Confirm those details and the inlet conditions for the actual installation; do not infer the fitted valve from the model name alone.
Can M0612 be selected by model name alone?
No. The FMC / M06 grouping is a source-catalog context. Confirm the full reference, equipment revision and drawing details before treating this item as a match. Material, pressure rating, stock and interchangeability require separate confirmation.
FMC / M0612
Ready to discuss this reference?
Save this source reference, then include the nameplate, configuration and required quantity for Dongli to verify.