DongliPump reference
SC-35 triplex pump
From cited manual · page / reference 1–2
- Stroke
- 2 in
- Maximum input power / speed
- 50 hp / 625 rpm
Manual values only. Supplied configuration and fitment need confirmation.
APLEX / SC-35Matching original PDFPage / reference 1–2
Supply identity and fitment need confirmation; this reference is not a price or stock commitment.
- Source brand
- APLEX
- Model
- SC-35
- Source reference
- SC-35
Original-source record
At a glance, from the manual.Source context and limits
These values come from the cited manual. Where image material is available, its source and limitations are noted separately below. The values do not confirm the supplied configuration; verify the actual pump before selection or quotation.
- Stroke
- 2 in
- Maximum input power / speed
- 50 hp / 625 rpm
Cited original manual
Pentair SC-35 Installation and Service Manual · AP-03-107 · 2014
Cited page / reference · 1–2
Ask about this source referenceWhat the source says
The APLEX SC-35 is identified as a triplex pump in Pentair manual AP-03-107. Its engineering table specifies a 2-inch stroke, splash-lubricated power end and maximum input power of 50 hp at 625 rpm. Confirm the supplied fluid-end and drive configuration against the equipment nameplate and required duty.
Prepare an inquiry
Identification reference. Supply identity and fitment require confirmation. No price or stock commitment.
About this reference
SC-35 triplex pump — reference SC-35. This entry is organized under APLEX / SC-35 using the supplied documentation. The source reference identifies a catalog entry; it does not establish interchangeability or current availability. This pump entry supports equipment identification and configuration enquiries. Selection requires a documented operating point and a confirmed supply scope, including whether the drive and accessories are included. The SC-35 engineering table describes a one-piece cast-iron power frame, full cylindrical ductile-iron crossheads and a heat-treated 4140 forged crankshaft. The power end uses splash lubrication. On the liquid end, the manual lists field-removable and replaceable cylinder liners made from ceramic-coated 416 stainless steel, with a 2-inch NPTF suction connection and a 1-1/4-inch NPTF discharge connection. These details describe the documented SC-35 configuration and support installation and maintenance enquiries. Verify the actual liquid-end material, piston size and drive arrangement before selecting parts or specifying a replacement pump; the listed maximum input power is a manual rating, not a claim about the supplied motor or a complete operating point.
Selection & verification
For SC-35 selection, provide the full nameplate, required flow and pressure at the same operating point, fluid, piston size, drive speed and installation envelope. Confirm the liquid-end configuration and whether the quotation includes the drive and accessories.
Have the equipment reference ready?
Search this model in the catalog ↗Documented details
| Stroke | 2 in |
|---|---|
| Maximum input power / speed | 50 hp / 625 rpm |
Before you inquire
Confirm the pump nameplate, exact model, existing part number and configuration. Reference numbers are not company stock codes.
Source documentation
Pentair SC-35 Installation and Service Manual · AP-03-107 · 2014
Page / reference: 1–2
A third-party source-page image (PDF page 10) is withheld from this public index while redistribution rights are checked. The cited model and page reference remain available for technical review. Contact Dongli ↗
View source record and citing products →
Supplied file reference checked
Local PDF cover identifies SC-35, AP-03-107 and 05/29/14. The file contains 12 pages and retains a Buckhorn watermark. This check does not approve fitment or current supply.
Supplied AP-03-107 copy: the MODEL SC-35 sectional drawing and parts list are source references, not a pump photograph or proof of the offered configuration or HDD fitment.
Questions before ordering
Does the SC-35 rating specify the supplied motor?
No. Manual AP-03-107 lists maximum input power of 50 hp at 625 rpm. This is a documented pump rating; it does not identify the supplied motor or establish a complete flow-and-pressure operating point.
Does the catalogue image show the exact SC-35 configuration?
The linked SC Series catalogue page lists SC-35, but its series photograph does not identify the exact SC-35 configuration. It is a source-document illustration, not a Dongli product photograph. Request configuration confirmation for the unit being quoted.
What information is needed for an SC-35 pump or parts enquiry?
Send the full nameplate and serial number, the installed liquid-end identification, piston size and any original part numbers. For a complete pump, also state flow, pressure, fluid and drive requirements. Confirm the actual configuration before selecting replacements.
APLEX / SC-35
Ready to discuss this reference?
Save this source reference, then include the nameplate, configuration and required quantity for Dongli to verify.